
Aviom A360 Personal Mixer Firmware v3.28  - 

A360_firmware.upd

This file contains firmware for the Aviom A360 Personal Mixer.

To apply this firmware to an A360 device, copy "A360_firmware.upd" to a USB flash storage device (i.e. thumb drive) under:
 
   \Aviom\Device_Update\A360_firmware.upd  

Start with the power to the A360 off. Insert the flash device containing the firmware into the A360's USB port and hold down the SAVE and SOLO buttons while applying power to the device to initiate the firmware update process.  Release the SAVE and SOLO buttons once you see the Channel Volume LEDs light. 


BE ADVISED: 
The A360 may potentially go dark (no LEDs turned on) during a portion of the update process for as long as 3 minutes.  Do not disrupt power to the A360 during this time as this is a normal part of the update process and must be allowed to run to completion.  The A360 will return to normal operation once the update process completes.  


FOR D800 and D800-DANTE USERS:
If your system includes a D800 or D800-Dante A-Net Distributor, be sure to update the firmware in those units as well, as the communications between the A360 and the D800 or D800-Dante requires matched firmware. For best results, update all the A360s in your personal mixing system to run the same firmware version. 

If you plan to use the A360 Display iOS app with your A360 and D800, the firmware must be updated in both devices to the most recent version to enable the functionality. 

D800 firmware is available in the Support section of the Aviom website, www.Aviom.com. 